Wilhams Insulation of Rye has recently launched WIL-MAT RSD-T&G. Tested to meet ‘Robust Standards Floating Floor Type FFT5, this resin bonded rubber sheeting laminated to water chipboard is perfectly suited for application under the entire laminate area in dwellings, commercial and industrial buildings. For example on intermediate floors as an insulating layer under the laminate in storerooms, industrial units, hotels, hospitals, libraries, schools, universities and general offices.

Wilhams WIL-MAT RSD-T&G conforms to the following specifications:
Total Laminate Weight 15.38kg/m²
T&G 18mm
12.5kg/m²
WIL-MAT 60

  • Colour – Black / Anthracite
  • Density 600kg/m³
  • Maximum load bearing – up to 3,000 kg/m²
  • Deflection of less than 1mm under load 0.14Mpa and dynamic stiffness of 0.25Mpa at 0.9N/mm³.
  • Tested according to BS EN 29052-1:1992, compliant with Approved Document E. Temperature range ― -30 to +80ºC
  • For further information on this and other insulation products contact Wilhams on 01797 226888.