For provision of services for these individual dwellings the Econoplate H Series requires a low temperature primary heat source(maximum 85°C) from a district scheme or smaller central plant room. At the heart of each unit are the stainless steel, compact, brazed Plate Heat Exchanger(s) which are packaged with the necessary equipment to control your heating and or instantaneous hot water requirements. All components are mounted within a smart epoxy coated enclosure.
There are 3 basic configurations –
Econoplate H2 units separate the district or communal heating system from the dwelling and provide indirect heating and hot water separated via 2 plate heat exchangers. (Twin Plate)
Econoplate H1 units have direct heating where the district water circulates around the dwelling and indirect hot water via a plate heat exchanger. (Single Plate)
Econoplate H1 unitscan also be provided for indirect heating only, with separation of district mains from the dwelling, again with a single plate heat exchanger. This option would be used when either there is no hot water requirement or hot water is to be provided by an indirect cylinder or other means. (Single Plate)