Dimmer modules are available as standard in 1 to 4 gang configurations to suit leading, trailing edge and 1-10v lighting loads (subject to lighting types and loads) using standard single and double sized face plates. They are also available on bespoke sized and multi-gang face plates and can be combined with switches that visually match the rotary dimmers or, alternatively rocker and dolly switches. Our in-house facilities enable us to match plate and component finishes across our product ranges.
Single Plates
One and 2 gang dimmers are available on single sized face plates.
Double Plates
Three and 4 gang dimmers can be supplied on double sized face plates (subject to maximum loadings).
Bespoke Dimmers
Larger multi-gang dimmers and face plates are available to order in certain product ranges, please enquire for further information specific to your project.
Rotary Dimmer Modules
These are available for most types of lamp and lighting fittings, including traditional tungsten filament lamps, low and mains voltage tungsten halogen lamps and many LED lamps and luminaires.
Rotary dimmers are all generally suitable for 2 way operation, i.e. push on/off switching and rotary dimming from a main location and on/off switching only from a second position using a matching push on/off switch, conventional rocker or dolly switch.
Momentary Dimming
By using a retractive rocker, dolly switch or bell push, simple on/off operation combined with a discrete dimming function can easily be achieved. Momentarily pressing-down and releasing the connected lighting switch will turn the lighting circuit on. Simply repeating this action once more turns the circuit off. To dim the lighting, press and hold the switch down for a few seconds to activate the dimming function, releasing the switch when the desired light level has been achieved. The dimming module automatically memorises the chosen setting, returning to the same level when next switched on. Please note, our retractive switches need to work in conjunction with inline dimmers or a third party lighting control system, such as Rako or Lutron.
Inline Dimmers
Our ‘Solo’ remote ‘in-line’ dimming modules utilise retractive rocker, dolly switches and bell pushes. These can also be configured for dimming using multi-gang switch-plates. Focus SB SOLO DIM is designed to dim individual circuits and provide greater control of lighting on a room-by-room basis.
The customisable dimming functionality is accessed in a room via a push-to-make action switch. The dimming module is installed in the electrical circuit behind the scenes in a wall or ceiling void.